[注册表类] [已解决]批处理设置打印端口时，注册表项的值如何搞定？

perfectxy

本人制作一个脚本，为机房电脑配置网络打印机，在设置打印端口时，注册表项的值无法搞定，请大虾帮助。部分代码如下：

::::创建注册表文件（PrntPort.reg）设置打印机端口
::::用变量"%PrntIP%"去设置打印机端口
@echo Windows Registry Editor Version 5.00 >PrntPort.reg

@echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports] >>PrntPort.reg
@echo "StatusUpdateInterval"=dword:0000000a >>PrntPort.reg
@echo "StatusUpdateEnabled"=dword:00000001 >>PrntPort.reg

@echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\"%PrintIP%"] >>PrntPort.reg
@echo "Protocol"=dword:00000001 >>PrntPort.reg
@echo "Version"=dword:00000001 >>PrntPort.reg
@echo "HostName"="%PrintIP%" >>PrntPort.reg
@echo "IPAddress"="%PrintIP%" >>PrntPort.reg
@echo "HWAddress"="" >>PrntPort.reg
@echo "PortNumber"=dword:0000238c >>PrntPort.reg
@echo "SNMP Community"="public" >>PrntPort.reg
@echo "SNMP Enabled"=dword:00000000 >>PrntPort.reg
@echo "SNMP Index"=dword:00000001 >>PrntPort.reg

其中由于有多台网络打印机，IP地址设定为192.168.1.11、192.168.1.12、192.168.1.13.....因此希望端口名称为打印机的IP地址，红色部分有问题，但是不知如何修改。

Batcher

@echo off
>PrntPort.reg echo Windows Registry Editor Version 5.00
>>PrntPort.reg echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports]
>>PrntPort.reg echo "StatusUpdateInterval"=dword:0000000a 
>>PrntPort.reg echo "StatusUpdateEnabled"=dword:00000001 
(for /f %%i in (ip.txt) do (
    echo,
    echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\Standard TCP/IP Port\Ports\"%%i"]
    echo "Protocol"=dword:00000001
    echo "Version"=dword:00000001
    echo "HostName"="%%i"
    echo "IPAddress"="%%i"
    echo "HWAddress"=""
    echo "PortNumber"=dword:0000238c
    echo "SNMP Community"="public"
    echo "SNMP Enabled"=dword:00000000
    echo "SNMP Index"=dword:00000001
    echo,
))>>PrntPort.reg
复制代码

perfectxy

感谢楼上，我试一下